Timberwolf TW 160PH - Decals

TW 160PH
DECALS
24 / 51
C190-0013 11.04.2019
Hot exhaust
Danger.
Rotating blades.
Keep hands and feet out.
High velocity discharge -
keep clear
Reverse feed
Forward feed
Personal Protective
Equipment required
New drive belts need re-
tensioning.
When new belts are fitted
check tension every 2-3 hours
& adjust until tension remains
constant.
Read the instruction
manual for greasing and
maintenance information
Push to stop.
Do not pull here.
The instruction manual
with this machine contains
important operating,
maintenance and health
and safety information.
Failure to follow the
information contained in
the instruction manual
may lead to death or
serious injury.
Lifting eye is designed to lift
the machine’s weight only.
Do not use hoist hook directly
on lifting eye. Use correctly
rated safety shackle only
through lifting eye. Lifting eye
to be inspected every 6
months or before each use.
Always visually inspect lifting
eye prior to each use. Do not
use lifting eye if damaged.
When re-fitting this guard
ensure that steel retaining
bracket is on the inside.
Damaged guards due to
incorrect assembly will not
be covered by your
Timberwolf warranty.
Clean under blades before
refitting or turning. Failure to do
so may result in blade(s) coming
loose and damage being caused
to the rotor housing
Decal Descripon
Decal Descripon
616
617
670
1661
1662
4099 x 2
2800 2801
18393
2949
3022
18438
1399
P691 x 2