PK-232 – MBX OPERATING MANUAL COMMAND SUMMARY
4/91 A-32 157
CRAdd ON|OFF Default: OFF
Mode: Baudot RTTY Host: CR
Parameters: ON - Send <CR><CR><LF> in Baudot RTTY.
OFF - Send <CR><LF> in Baudot RTTY (default).
The CRADD command permits you to set the PK-232's "newline" sequence so that an additional
carriage return is ADDed automatically at the end of each typed line.
When CRADD is ON the line-end sequence is <CR><CR><LF>. When CRADD is OFF the line-end
sequence is <CR><LF>. The double carriage return is required in some RTTY services such as
MARS. CRADD has no effect on received data.
CStatus [Short] Immediate Command
Mode: Packet Host: Not Supported
CSTATUS is an immediate command helpful in multiple connections.
When CSTATUS is typed, your monitor displays Link State of all ten logical channels as well as the
current input/output channel as follows:
NOT CONNECTED TO ANY STATION CONNECTED TO TWO STATIONS
cmd:cs cmd:cs
Ch. 0 - IO DISCONNECTED Ch. 0 - IO CONNECTED to WX1AAA
Ch. 1 - DISCONNECTED Ch. 1 - CONNECTED to WX1BBB
Ch. 2 - DISCONNECTED Ch. 2 - DISCONNECTED
Ch. 3 - DISCONNECTED Ch. 3 - DISCONNECTED
Ch. 4 - DISCONNECTED Ch. 4 - DISCONNECTED
Ch. 5 - DISCONNECTED Ch. 5 - DISCONNECTED
Ch. 6 - DISCONNECTED Ch. 6 - DISCONNECTED
Ch. 7 - DISCONNECTED Ch. 7 - DISCONNECTED
Ch. 8 - DISCONNECTED Ch. 8 - DISCONNECTED
Ch. 9 - DISCONNECTED Ch. 9 - DISCONNECTED
CSTATUS will give a short display if desired. CSTATUS SHORT (or CS S) displays only the current
input/output channel or those channels which are connected.
CText text Default: empty
Mode: Packet Host: CT
Parameters: text - Any combination of characters up to a maximum of 120 characters.
CTEXT is the "automatic answer" text sent when CMSG is ON. The message is sent only when an-
other station connects to you. A typical CTEXT message might be:
I'm not available right now. Please leave a message on my MailDrop.
Clear CTEXT with %, &, NO, NONE or OFF, or simply set CMSG OFF.
To Next Page
Loading...