63
Date of Origin – 02/24/11
Updated – 02/03/20
IMPORTANT - READ THIS
Timpte Tender Reference Guide
Thank you for purchasing a new Timpte Tender Trailer. If you are a rst time purchaser or a long time customer this guide is a
starting point to better understanding of your Timpte Trailer.
• Inspect your trailer to ensure that all is correct and complete as ordered.
Maintenance Schedule – Please refer to the maintenance schedule in the trailer packet. This document contains important information about
maintenance, lubrication and torque requirements. Some highlights:
a. Alignments – Complimentary if completed within the rst year (12 months) of use:
1. Per manufacturer, within the rst 90 days of use is recommended
2. Contact Timpte Warranty for pre-approval (402-367-3056)
b. Check wheel torque within the rst 50 to 100 miles (450 to 500 ft-lbs dry).
c. Several Daily inspections are required of all operators. Refer to the Operators Manual for
details (page 64-65).
d. Lubrication (Refer to Operators manual).
1. Check hub oil daily (change every 100,000 miles).
2. Lubricate auto slacks and Cam bushings every 25,000 miles or semi-annually.
3. If so equipped ensure that vibrators are getting properly lubricated and oil reservoir is lled.
If not equipped with auto oiler, vibrators must be oiled prior to each use.
e. Change hydraulic lter.
1. After rst 40 hours of use.
2. At least every 6 months thereafter.
• Warranty – The Timpte Warranty Department will need to be contacted in advance for warranty
repairs and a claim number issued for such repairs that are warrantable (402-367-3056).
• Hydraulic Specications for the Tender Trailer Models:
To Next Page
Loading...
