24
Want to set DHCP enable or disable? --------- Manual settings
Want to set a Net Remote Pin code? --------- NetRemote PIN Setup
Want to see the list of registered networks or delete some of unwanted networks? --------- Network
profile
Want to keep network connected when radio in standby mode? --------- Keep network connected
3. Press OK button to confirm your setting.
Set Time/Date
1. Press MENU button > Main menu > System settings > Time/Date, press OK button to confirm.
2. Press or button to select options, and then press OK button to confirm the setting.
Set Time/date:
Manually set-up both Time and Date
Auto update:
‘Update from DAB’, ‘Update from Network’ or ‘No update’
Set format:
12 or 24 hour format
Set timezone:
Select a timezone
(Only available when auto update from Network.)
Daylight saving:
Daylight saving settings
(Only available when auto update from Network.)
3. Then setting time according to your personal preference.
Set Language
1. Press MENU button > Main menu > System settings > Language, press OK button to confirm.
2. Press or button to select your language, and then press OK button to confirm.
Factory Reset
A factory reset resets all user settings to default values, so time/date and presets are lost.
1. Press MENU button > Main menu > System settings > Factory Reset, press OK button to
confirm.
2. Press or button to select ‘YES’, and then press OK button to confirm.
Software Update
From time to time, your receiver may make software upgrades available with bug fixes and/or
additional features.
If your receiver detects that newer software is available, it will display the message if you want to go
ahead with an update. If you agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
To Next Page
Loading...
