Titan PROTOUCH - Spraying Technique; Adjusting the Spray Tip; Spraying Motion and Posture

English
8
Spraying
Technique
Start
To prevent an injection injury,
make sure the battery pack is
removed before you adjust the
spray tip. Make sure the spray tip
is sufciently hand tightened.
Never tip the sprayer at more than
a 45º angle when spraying
overhead. Material could get into
the motor housing and cause an
electric shock.
Adjusting the
spray tip
3. Keep your arm moving at constant speed and keep the
sprayer at a constant distance from the surface. The
sprayer should be triggered at the beginning of the
stroke and released at the end of the stroke.
1. Spraying horizontally (side to side) -
Orient the spray tip as shown.
4. Keep the sprayer at right angles to the surface. This
means moving your entire arm back and forth rather
than just exing your wrist.
2. Spraying vertically (up and down) -
Orient the spray tip as shown.
Keep stroke
even
End
stroke
Start
stroke
Pull
trigger
Release
trigger
Move steadily
Aproximately
10 to 14 inches
3
1
Heavy Coat
Do not flex
wrist while
spraying.
Light Coat Light Coat
4
2