Titan PROTOUCH - Cleanup - Oil Based Materials; Oil-Based Materials Cleanup Procedure

English
12
Cleanup -
oil based
materials
Start
You will need:
• Waste container
• Warm soapy water if you sprayed latex
materials
• Mineral spirits if you sprayed oil-based
materials
Make sure you clean the sprayer in a
well-ventilated area whenever
cleaning with flammable solvents.
1. Press the black button (a) to
unlock the battery pack and
remove it.
4. Attach the container and
replace the battery pack.
Squeeze the trigger until the
solution comes through the
sprayer for several seconds.
2. Pour the remaining material
back into the original container.
Rinse the inside of the cup
with the appropriate cleaning
solution.
5. Remove the battery pack.
Remove the container and
properly dispose of the
remaining solution.
3. Fill the container half full of the
cleaning solution appropriate
to the type of material you
sprayed Replace the battery
pack.
6. Remove the suction tube.
(a)
1
4
2
5
3
6