Need help?Do you have a question about the TKH KEYPROCESSOR Pluto and is the answer not in the manual?
General| Brand | TKH |
|---|---|
| Model | KEYPROCESSOR Pluto |
| Category | Controller |
| Language | English |
How to mount the controller on a DIN rail.
Connect power and tamper contact to the controller.
Describes the stacking connector for modular controllers.
Explains the various use cases for the Pluto controller.
Lists necessary software versions for optimal Pluto performance.
Details the various ports and connections on the Pluto.
Explains the meaning of the Pluto's status LED colors.
How the Pluto operates without network connection.
How to connect Orion devices to the Pluto.
How to establish a serial connection using a USB-RS232 converter.
Configuring network settings like IP address for the Pluto.
Explains the various use cases for the Orion controller.
Lists necessary software versions for optimal Orion performance.
Details the functions and support capabilities of the Orion controller.
Describes how the Orion connects and interacts with the Pluto.
Explains RS485 bus communication setup for the Orion.
How Orion replaces the Orbit reader functionality.
Details the various ports and connections on the Orion.
Visual guide to the Orion's connection port labels and imprints.
Explains the meaning of the Orion's status LED colors.
Describes how to use SD cards with the Orion for added functionality.
Instructions for inserting an SD card into the Orion.
Information on calamity cards for offline access.
Features supported by Orion during offline operation.
Explains how to connect multiple Orions together using stacking connectors.
How to connect various types of card readers to the Orion.
Details on connecting RS485 card readers to the Orion.
Specific wiring instructions for RS485 card readers.
Wiring specifications for RS485 card readers.
Information on connecting Clock-data/Wiegand card readers.
Instructions for connecting the card reader.
Wiring specifications for Clock-data/Wiegand card readers.
How to configure bus connections with card readers.
Setting up Pluto as the start of a kpBus with Orions.
Wiring details for kpBus connections starting with Pluto-Orion.
Using Polyx as the start of a kpBus.
Wiring details for kpBus connections starting with Polyx.
Using an adapter board for network controller to Orion connections.
Connecting kpSensors for environmental monitoring.
Wiring specifications for kpSensor connections.
Details default input and output configurations for Orion.
How to connect Orion to network controllers, similar to Orbit readers.
Controller to Orion PRT1 RS422 connection details.
Wiring specifications for controller-Orion connections.
Default I/O mapping when Orion replaces an Orbit reader.
Steps to perform diagnostic tests on the Pluto controller.
Connecting and performing diagnostics on Polyx/iPU-8 via console.
Steps to initiate diagnostic tests on the IPU-8 controller.
Performing diagnostics on multiple Orions connected on one data line.
Testing Orion as an Orbit reader replacement via Polyx diagnostics.
Step-by-step guide to installing and configuring the Pluto controller.
Adding a new Orion to an existing Pluto setup.
Adding an RS485 reader to an existing Orion.
Adding a new Orion to an existing Polyx setup.
Replacing Polyx units with Pluto and Orion configurations.
Replacing dual kpBus Polyx with Pluto and two Orions.
Replacing iPU-8 with Pluto and four Orions.
Restoring the Pluto controller to its factory default settings.
Steps to remove iProtect data from the Pluto controller.
Technical specifications for the Pluto controller.
Technical specifications for the Orion controller.
Declaration of conformity for the Pluto controller.
Declaration of conformity for the Orion controller.
Wiring diagram for Pluto/Orion setup with network and power.
Wiring diagram for Pluto/Orion with Sirius RS485 and IO.
Wiring diagram for Pluto/Orion with Sirius clock-data/Wiegand and I-O.
Wiring diagram for Pluto/Orion with IO, Sirius clock-data/Wiegand, and Orbits.
Wiring diagram for Pluto with power supply and USB-RS232 converter.
Wiring diagram for Pluto/Orion connections using kpBus.
Wiring diagram for Orion connections using kpSensor bus.
Wiring diagram for Pluto/Orion with multiple RS485 readers.
Wiring diagram for Pluto/Orion with clock-data/Wiegand readers.
Wiring diagram for Pluto/Orion with RS485 readers and kpBus.
Wiring diagram for Polyx connections using kpBus.
To Next Page
