TKH KEYPROCESSOR Pluto User Manual

7
2 General
2.1 Mounting
 Mount on a 35mm DIN rail type O profile.
 Mount the rail to a wall or inside a secure casing.
 Place the modular controller against the rail and click it into place.
Mounting the modular controller onto the rail.
NOTE For every modular controller, note the location, serial number and/or MAC address
of the device. This information can be found on top of the device, just below the
LED.
Figure 1: Mounting controller

TKH KEYPROCESSOR Pluto Specifications

General

Brand	TKH
Model	KEYPROCESSOR Pluto
Category	Controller
Language	English