TOHATSU F40 - Preface; General Safety Information; Danger Hazard; Warning Hazard

2
2016 Installation Manual
Preface
This manual covers the Multi-Function Tiller Handle Kit installation procedure.
Read this manual carefully and preform the correct procedures. Only Authorized Dealers should
perform the set-up and installation.
GENERAL SAFETY INFORMATION
Before installing, operating or otherwise handling your outboard motor, be sure to thoroughly read and
understand this Owner's Manual and carefully follow all of the instructions.
Attention.
DANGER
Indicates the presence of a hazard
which, if ignored, will result in
severe injury or death.
Contents
Parts List …………………………………………………………………………………………………………………… 1
Dimensions for full tilt up and steering ……………………………………………………………………………… 3
Preparation ………………………………………………………………………………………………………………… 4
Multi-function Tiller Handle installation ………………………………………………………………………………
4
Shift/Throttle cable adjustment ………………………………………………………………………………………… 6
Friction Lever Installation ………………………………………………………………………………………………… 8
Friction Lever adjustment and operation ……………………………………………………………………………… 8
Operation inspection ……………………………………………………………………………………………………… 9
Wiring
Diagram …………………………………………………………………………………………………………… 10
WARNING
Indicates the presence of a hazard
or a n unsa f e activ i t y which , if
ig nored, could result in sev ere
injury or death.
CAUTION
Indicates the presence of a hazard
or a n unsa f e activ i t y which , if
i g no r e d, c ou ld r e su l t i n m i no r
personal injury or damage to the
products or facilities.
Tillerhandle_F4050E_160316.indd 2 16.3.16 5:57:50 PM