@ToolkiRC 2022
Customize function
M7AC supports customizable boot image and voice
packs. Insert a TF card with a capacity of 128MB-16GB
into the TF card slot on the side of the M7AC，connect
the USB-A cable in the box to the computer. Two USB
drives will show on the computer. The Toolkit USB drive is
used for upgrading firmware, and the other USB drive is
used for storing customized files. The root directory
contains 2 folders: LOGO stores the boot images, and
SOUNDS stores voice files. The modification instructions
are as follows：
1，Boot image
When the M7AC is turned on, it will automatically
read the file named logo.bmp in the LOGO folder. If the
file is successfully read, the image will be displayed as
the startup page.
To Next Page
Loading...
