22
Using the telephone
2.6 Internal call transfer
Transfer an external call to another handset.
2.7 Make a 3-way conference call
The conference call feature allows one external call to be shared with two handsets (in intercom).
During an external call:
2.8 Speaker volume during call
2.9 Microphone mute
It is possible to mute the microphone during a conversation.
2.10 Using the alphanumerical keypad
With your telephone, you can also enter alphanumeric characters. This is useful for entering a name
into the phonebook, giving a name to the handset, ...
To select a letter, press the corresponding key as many times as necessary. For example, to select
an ‘A’, press ‘2’ once. To select a ‘B’, press ‘2’ twice and so on. To select ‘A’ and then ‘B’
consecutively, press ‘2’ once, wait until the cursor moves on to the next character, then press ‘2’
twice.
1 Press the left menu key.
2 Select “INTERCOM” and press OK.
3 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
4 When the other handset picks up, press the on-hook key to hang up and
transfer the call.
If the internal correspondent does not pick-up, press the on-hook key again to
reconnect to the external caller on line.
5 Press the on-hook key to hang up or put the handset back on the base.
1 Press the left menu key.
2 Select “INTERCOM” and confirm.
3 Enter the number of the internal handset (1 to 5), the external caller is put
on hold.
4 When the other handset picks up, press and hold the ‘*’-key to establish the
conference call.
If the internal correspondent does not pick-up, press the on-hook key to
reconnect to the external caller on line.
1 During a conversation, press the up or down key to change the volume
accordingly.
1 Press the right menu key. You can talk freely without being heard by the
calling party.
“MUTED” is displayed.
2 Press the right menu key again to return to normal mode.
Press ‘1’ to select a space.
Press right menu key to delete a character.
To Next Page
Loading...
