Topcom BUTLER E600 TWIN - View a Phonebook Entry

24
Phonebook
4.3 View a phonebook entry
4.4 To dial an entry from the phonebook
4.5 Storing a redial number into the phonebook
4.6 Delete a phonebook entry or all phonebook entries
4.7 Check phonebook usage
1 Press the phonebook key.
2 Select a name or enter the first letter of the name. (The list scrolls in
alphabetical order.)
3 Press menu.
4 Select “VIEW” and confirm.
5 Press up/down to see name, number and melody
6 Press the right menu key to go back.
1 Press the phonebook key.
2 Select a name or enter the first letter of the name. (The list scrolls in
alphabetical order.)
3 Press the off-hook key to start the call.
4 Press the on-hook key to hang up or put the handset back on the base.
1 Press the redial key to access the redial list.
2 Select the desired redial number and press menu-key
3 Select “ADD TO PB” and confirm.
4 Enter the name and confirm.
5 Edit the number and confirm
6 Select the melody and confirm.
1 Press the phonebook key.
2 Select a name or enter the first letter of the name. (The list scrolls in
alphabetical order.)
3 Press menu.
4 Select “DELETE” to delete the current entry and confirm.
OR
5 Select “DELETE ALL” for all entries and confirm.
6 If “DELETE ALL” is selected you have to confirm again to delete.
1 Press the phonebook key and then menu key.
2 Select “PB STATUS” and confirm.
3 The usage will be shown: “XX/20”. XX = amounth of entries stored.