EasyManua.ls Logo

Topcom BUTLER E600 TWIN - Technical Specifications; Warranty and Disposal; Topcom Warranty; Warranty Exclusions

Topcom BUTLER E600 TWIN
188 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
31
Technical specifications
11 Technical specifications
12 Topcom Warranty
12.1 Warranty period
The Topcom units have a 24-month warranty period. The warranty period starts on the day the new
unit is purchased. There is no warranty on standard or rechargeable batteries (AA/AAA type).
Consumables or defects causing a negligible effect on operation or value of the equipment are not
covered.
The warranty has to be proven by presentation of the original or copy of the purchase receipt, on
which the date of purchase and the unit-model are indicated.
12.2 Warranty exclusions
Damage or defects caused by incorrect treatment or operation and damage resulting from use of
non-original parts or accessories are not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire,
nor any damage caused during transportation. No warranty can be claimed if the serial number on
the units has been changed, removed or rendered illegible.
Any warranty claims will be invalid if the unit has been repaired, altered or modified by the buyer.
This appliance may only be used with rechargeable batteries. If you want to replace the originally
included batteries, please check whether the batteries you use are suitable and rechargeable.
Alkaline batteries may under NO circumstances be used in the handsets. If you use Alkaline
batteries and place the handset on the basis, the batteries will heat up and may explode. Any damage
which may be caused cannot be recovered from the manufacturer and the damage thus caused to the
appliance is not covered by the warranty conditions. Any repairs will be charged to you.
Standard DECT (Digital Enhanced Cordless Telecommunications)
GAP (Generic Access Profile)
Frequency range 1880 MHz to 1900 MHz
Number of channels 120 duplex channels
Modulation GFSK
Speech coding 32 kbit/s
Emission power 10 mW (average power per channel)
Range maximum 300m in open space / 10-50m inhouse
Number of handsets Up to 5
Base power supply 230 V / 50 Hz / 6 V DC 400 mA
Charger power supply 230 V / 50 Hz / 7,5 V DC 200 mA
Handset Batteries 2 rechargeable batteries AAA, NiMh 1,2V, 550mAh
Handset autonomy 110 hours in standby
Handset talk time 9 hours
Normal conditions of use +5 °C to +45 °C
Flash time 100, 300 or 600 ms

Table of Contents

Other manuals for Topcom BUTLER E600 TWIN

Related product manuals