Topcon Compu-Vision CV-5000 Instruction Manual

47
MAINTENANCE
SETTING THE PRINTER PAPER
Use the printer paper of width 58mm.
1 Push the printer release lever to open the cover.
2 Insert the printer paper to the printer shaft and
load the paper to the printer.
3 Pull out the paper end to the outside of the ejec-
tion port.
4 Close the cover. You can make sure by a "click"
sound that the cover is locked.
NOTICE
The paper has its front and rear. If the paper is reversely set, printing
is impossible.
NOTICE
Insert the paper to the innermost of the printer.
If not, the paper may not be fed.

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English