24 FC-5000 Ruggedized Field Computer Owner’s Manual
Legacy Support
In addition to the Sensor and Location APIs, legacy
applications that require access to a serial port can access
NMEA data through a serial COM port interface. The name
of the COM port can be found by using Device Manager
and looking under Ports (COM & LPT) for “u-blox Virtual
COM port (COMx) where “x” is the port number allocated
on your device.
GPS/GNSS Accuracy
The GPS/GNSS antenna is under the notication LEDs and
is intended to work in both portrait view and landscape
view. Do not put your hand or another object over this area.
Accuracy could be reduced. The more items between the
antenna and the satellites, the lower the accuracy.
Camera
FC-5000 Ruggedized Field Computers have a front facing
camera that is 2 MP and a rear facing camera that is 8 MP.
The camera app is accessed from the Start menu, All apps
> Camera. There is also a camera tile in the Start menu. You
can set up a programmable key to launch the camera app
if you desire. See Chapter 2, Standard Features, Keyboard
Features, Programmable Keys for more information.
Both the still image camera and video camera are
available from this screen. Other options like audio and a
ash are shown at the top of the camera screen.
Photo and Video Library
Photographs and videos are automatically stored in the
Pictures folder.
To Next Page
Loading...
Need help?
General
