7-1
7 DATA COLLECTION
7DATA COLLECTION
The GTS-230W is able to store the measured data into the internal memory.
The internal memory is shared by the measured data files and the coordinate data files.
Maximum 30 files can be generated.
●
Measured data
The collected data is memorized into a files.
●
The number of measurement points
( In case not using the internal memory in layout mode)
Because the internal memory covers both data collection mode and layout mode, the number of
measurement points will be decreased when the layout mode is used.
For the internal memory, refer to Chapter 9 “MEMORY MANAGER MODE”.
1) When turning off the power, ensure that you are in the main menu screen or main angle
measurement mode.
This ensures completion of the memory access process and avoids possible damage to the
stored data.
2) It is recommended for safety to charge the battery (BT-52QA) beforehand and prepare fully
charged spare batteries.
MAX. 8,000 points
To Next Page
Loading...
