EasyManua.ls Logo

Topcon RL-VH3A - Calibration Procedures; Checking Horizontal Calibration

Topcon RL-VH3A
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Note:
1) It can be charged while using the laser.
2) The BT-49Q rechargeable battery can be charged when removed from laser.
3) When the BT-49Q rechargeable battery is taken off from the DB-49 battery holder, the
instrument can be used with dry batteries instead of BT-49Q.
Note:
1) Recharging should take place in a room with an ambient temperature range of 10°C to
40°C (50°F to 104°F).
2) The battery source will discharge when stored and should be checked before using with
instrument .
3) Be sure to charge stored battery source every 3 or 4 months and store in a place at 30°C
or below. If you allow the battery to be completely discharged, it will have an effect or fu-
ture charging.
4) Recharging of the BT-49Q may sometimes be complete within 9 hours because of its re-
maining capacity.

Other manuals for Topcon RL-VH3A

Related product manuals