1 Introduction
1.2 Controlling the digital receiver 3
a wall socket to be in standby mode so that it can run timer
events at any time.
1.2.1 Front panel
The front panel of the digital receiver has buttons to control
the digital receiver, specific lights and a display to indicate its
status. The following indicates what they mean.
button switches the digital receiver between standby mode
and active mode.
CHANNEL
c
,
a
buttons switch to the previous or next ser-
vice.
VOLUME
b
,
d
buttons decrease or increase the volume.
Front display shows the current time in standby mode, and
displays the current service in active mode.
There is a tiny flap on the bottom right side that protects the
USB port behind it from dust, into which you can plug an ex-
ternal storage such as a memory stick or an external hard drive.
To Next Page
Loading...
Need help?
General