Topshine MT100 - Engine Immobilization and Speed Alarms

TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100
- 12 -
6.4 To cut off Engine, immobilize the vehicle
Command: W<password>,020,P,F
Description: P=1, means output1, P=2 means output2 … P=5, means output5
F=0, to disable this output function; F=1, to enable this output function
Example:
SMS send: W000000,020,1,1
If the output1 is connect to oil-cut relay, this command is to enable the engine-cut function,
the engine oil pump line will be cut-off to immobilize the vehicle.
While send W000000,020,1,0 is to restore the engine oil pump line and the vehicle can be
started again.
6.5 Set over speed alarm
Command :W<password>,005,XX
Description: XX(the speed preset value) XX=00, disable XX=[01<XX<20](unit:10Km)
Example:
SMS send:W000000,005,10
SMS receive: SET OK! SPEED LIMIT:100Km/h
Meaning: If your speed is over 100Km/h, an alarm SMS will send to your phone to warn you.
6.6 Harsh acceleration/braking alert
SMS command: W<password>,047,X
Description: X means value of velocity change, 1 to 2 digitals. Default value is 0 for disable
acceleration/braking alert function.
(1) Acceleration Alert: When the speed is over 20km/h, if the speed increase over X km/h in 5
seconds, the tracker will trigger acceleration alert, send the alarm data to tracking platform, its
alarm code is 0x73.
Example:
SMS send: W000000,047,5