Topshine MT100 - Fuel Alarms and Impact Detection

TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100
- 13 -
Meaning：When the speed is over 20km/h, if the speed increase over 5 km/h in 5 seconds, the
tracker will trigger acceleration alert, send the alarm data to tracking platform.
(2) Braking Alert: When the speed is over 20km/h, if the speed decrease over (X+10) km/h
in 5 seconds, the tracker will let out braking alert, send the alarm data to tracking platform,
the protocol number is 0x72.
Example:
SMS send: W000000,047,10
Meaning: When the speed is over 20km/h, if the speed decrease over 20 km/h in 5 seconds,
the tracker will let out braking alert, send the alarm data to tracking platform.
6.7 Oil leaking/Refuel Alarm
SMS command: W000000,094,X
Description: X = 000~199(unit: second), means for fuel capacity change exceed preset value
in the time interval X, it will send out oil leaking or fueling alarm, send alarm data to tracking
platform, the leaking protocol number is 0x74, the fueling protocol number is 0x76. And if X
is less than or equal to 5 seconds, then the function will be disabled. System default value is
10 seconds.
6.8 Enable Impact Alarm Function:
SMS command: W<password>,028.1
Meaning: If the vehicle impact , an alarm SMS will send to your phone to warn you
Disable Impact alarm function:
SMS command: w<password>,028,0
When sending out impact alarm, alarm data will be sent to platform, alarm code is 0x14
System’s default setting is disable function of impact alarm