Topshine MT100 - RFID Function Configuration and Usage; RFID SMS Command Control

31 pages

To Next Page

To Previous Page

TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100

- 25 -

3. Send W******,017 or W******,117 without data

to disable this function.

Appendix 3 Configure and use of RFID function

RFID Reader RFID Tag

1. Install RFID as following:

2. How to use

2.1 SMS Commands

2.1.1 Enable the RFID:

(1) Enable the RFID function：W000000,062,1

(2) Disable the RFID function: W000000,062,0

(3) The system default is RFID function enabled.

(4) When send the disarming SMS command ”000000DSM”, it will automatic disable the

RFID function, and if send the enable SMS command the RFID function will be restored.