Topshine MT100 - Authorizing RFID Tags via SMS; System Arming and Disarming via SMS

TOPSHINE TRACKING TECHNOLOGY USER MANUAL OF MT100
- 26 -
2.1.2 To configure authorized RFID tag by SMS commands
W<password>,060,num1
W<password>,160,num2
W<password>,260,num3
W<password>,360,num4
W<password>,460,num5
Note: The default password is 000000
Num1, num2, num3, num4, num5 means 5 digital FRID number.
For example: if configure NO.00412 as the authorized RFID tag, then send SMS:
W000000,060,00412
Tracker will reply SMS “STUDY ID OK: 1:00412; 2:00000; 3:00000; 4:00000; 5:00000”,
means the 1st RFID tag number is 00412, the 2nd , 3rd, 4th, 5th RFID tag not set. If the RFID
tag is detected at this time, tracker will send SMS “NOW ID : 00412 “ .
Note: RFID reader detecting test RFID tag distance is within 5 meters, the RFID tag
must be detected before RFID can be used.
2.1.3 The ARMING SMS command: “<password>ARM ”
The disarming SMS command “<password>DSM ”,
When send the disarming SMS command “000000DSM”, it will automatic disable the
RFID function, and if send the enable SMS command the RFID function will be restored.
Another way to configure authorized RFID tag by Parameter.
Step 1: Open GPS Tracker Editor (2010) V2.65 (following picture)
(Following Appendix 1 to configure the tracker)