Tormatic W-800 - Declaration of Conformity and Incorporation; Declaration of Incorporation in Accordance with the EC Machinery Directive 2006;42;EC; Declaration of Conformity According to Directive 2014;53;EU

57
Declaration of conformity and incorporation
W-800
Declaration of conformity and incorporation
Declaration of Incorporation in accordance with the EC Machinery Directive 2006/42/EC
Manufacturer's Declaration of Incorporation (Translation of the Original)
For the incorporation of partly completed machinery in accordance with the ECMachinery Directive2006/42/EC,
AnnexII, part1, SectionB
We hereby declare that the following partly completed machinery – as far as possible with respect to the scope of
supply – complies with the essential requirements of the ECMachinery Directive.
The partly completed machinery is only intended to be incorporated into a door system to thus form a complete
machine within the meaning of the ECMachinery Directive. The door system must not be put into service until
the  nal machinery has been declared in conformity with the provisions of the ECMachinery Directive and the
ECDeclaration of Conformity according to AnnexIIA is available.
We furthermore declare that the relevant technical documentation for this partly completed machinery has
been compiled in accordance with Annex VII, part B, and undertake to transmit it through our Documentation
Department in response to a reasoned request by the competent national authorities.
Machine type: Garage operator
Machinery designation: W-800
Year of manufacture: from 2019
Relevant EC/EUdirectives: Directive 2014/30/EU on electromagnetic compatibility as of 29/03/2014
Directive 2011/65/EU on restrictions on the use of certain hazardous
substances in electrical and electronic equipment as of 01/07/2011
Ful lled requirements of the
ECMachinery Directive 2006/42/
EC, AnnexI, part1:
1.1.2, 1.1.3, 1.1.5, 1.2.1, 1.2.2, 1.2.3, 1.2.4, 1.2.5, 1.2.6, 1.3.1, 1.3.2,
1.3.4, 1.3.7, 1.5.1, 1.5.4, 1.5.6, 1.5.14, 1.6.1, 1.6.2, 1.6.3, 1.7.1, 1.7.3,
1.7.4
Applied harmonised standards: EN ISO 12100:2010, EN ISO 13849-1:2015, PL “C” Cat. 2
EN 60335-1:2012 (as applicable), EN 61000-6-3:2007 / A1:2011
EN 61000-6-2:2005 / AC:2005,
EN ISO 13850:2008, EN 60204-1:2006/AC:2010,
EN 617:2001+A1:2010; EN 618:2002+A1:2010
Other applied technical standards
and speci cations:
EN 300220-1:2017-05, EN 300220-2:2017-05
EN 301489-1:2017, EN 12453:2017
EN 60335-2-95:2015-01 / A1:2015-06
Manufacturer and name of the
authorised representative of the
technical documentation:
Novoferm tormatic GmbH
Eisenhüttenweg 6
44145 Dortmund
Dortmund, 24 Nov 2018
Place, date Dirk Gößling, Managing Director
Declaration of Conformity according to Directive 2014/53/EU
The integrated radio system complies with Directive 2014/53/EU.
The full text of the Declaration of Conformity can be found at: https://www.tormatic.de/dokumentation/