EasyManua.ls Logo

Tornado MICROBURST - Battery Maintenance and Charging

Tornado MICROBURST
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
BATTERY MAINTENANCE & CHARGING
Battery type
Use the batteries in the package or provided by professional technicians to power
the machine only. Do not use other batteries.
The machine is powered by a lithium battery. Only one battery can be installed in the
battery compartment
Note: Follow all local codes and regulations for battery maintenance and disposal.
Battery storage requirements
When the machine is stored for more than a week, please charge the battery
fully, remove the battery from the machine and store in a cool, dry area (optimum
environment is 68°F/20°C, 65% humidity). If storing for more than 6 months,
charge the battery fully every 2 months.
Battery charging
It must be charged before the first use, or when the power provided by the machine
cannot be completed. Please follow the steps below to charge the battery.
1. Place the machine in a special charging area.
Note: The room for battery charging must be properly ventilated to prevent the gas
generated during battery charging from accumulating in the room.
2. If the machine is working,please shut off the machine power switch.
3. Fix the handle in the vertical position.
4. Make sure the charger specification matches the machine before charging.
Note: Charger can only be used indoors.
5. Rotate the protective cover of the battery charging socket (picture 1).
6. Connect the power plug to the power supply, and the display light of the
charger is red.
7. The battery Charger light automatically turns green when the battery is fully
charged. At this time, the charging plug can be removed from the charging
socket and the protective cover replaced.
Note: It is normal for the charger indicator light to alternate green and red when the
battery is in the final stages of charging.
Note: To prevent damage to the plug, grasp the head of the plug instead of the wire
when taking it out.
Note: If the battery of the machine is overcharged, there may be a risk of explosion
or chemical burning. To prevent overchanging, use only the battery and charger
provided with this unit.
Note: The battery and charger may heat up during charging. This is normal and does
not mean that there is any problem with the battery.
8. Close the protection cover of battery charging socket.

Related product manuals