Reelmaster 7000−DPage 4 − 20Kubota Diesel Engine
16.Connect air cleaner intake hose to air cleaner.
17.Secure coolant reservoir bracket with reservoir to
machine frame (Fig. 17).
18.Connect coolant reservoir hose to the radiator
(Fig. 17).
19.Make sure radiator draincock is closed and fill radia-
tor and reservoir with coolant.
20.Check position of wires, fuel lines, hydraulic hoses
and cables for proper clearance with rotating, high tem-
perature and moving components.
21.Connect positive battery cable first and then nega-
tive battery cable. Secure battery cover to machine.
22.Check and adjust engine oil level as needed.
23.Check and adjust hydraulic oil level as needed.
24.Prime the fuel system (see Priming The Fuel System
in this chapter).
25.Start engine and operate hydraulic controls to prop-
erly fill hydraulic system (see Charge Hydraulic System
in Chapter 5 − Hydraulic System in this manual).
26.Install hood on the machine (see Hood Installation in
Chapter 8 − Chassis in this manual).
To Next Page
Loading...
Need help?
General
