Toro 07360 - Install the ROPS; Activate and Charge the Battery

5
InstalltheROPS
Partsneededforthisprocedure:
1
ROPSframe
4
bolt,1/2x3”in.
4
Locknut,1/2
Procedure
1.InserteachsideofROPSintomountingbracket
oneachsideofvehicleframe,positioningROPSas
showninFigure8.
Note:TheROPScoverplatemountingboltsmay
havetobeloosenedtoinserttheROPSintothe
mountingbrackets.
2.SecureeachsideofROPStomountingbracketswith
(2)1/2–13x3”lg.boltsandlocknuts.
Figure8
1.ROPS3.Covermountingplate
2.Mountingbracket
6
ActivateandChargethe
Battery
Partsneededforthisprocedure:
Procedure
Ifbatteryisnotlledwithelectrolyteoractivated,it
mustberemovedfromvehicle,lledwithelectrolyte
andcharged.Bulkelectrolytewith1.260specicgravity
canbepurchasedfromalocalbatterysupplyoutlet.
Warning
CALIFORNIA
Proposition65Warning
Batteryposts,terminals,andrelated
accessoriescontainleadandleadcompounds,
chemicalsknowntotheStateofCalifornia
tocausecancerandreproductiveharm.
Washhandsafterhandling.
Batteryelectrolytecontainssulfuricacidwhich
isadeadlypoisonandcausessevereburns.
•Donotdrinkelectrolyteandavoidcontact
withskin,eyesorclothing.Wearsafety
glassestoshieldyoureyesandrubbergloves
toprotectyourhands.
•Fillthebatterywherecleanwaterisalways
availableforushingtheskin.
1.Loosenknobssecuringbatterycovertobatterybase
andslidecoveroff.
16