Toro 07360 - Cleaning Hydraulic Strainer; Emergency Box Raising

Figure77
1.Hydrauliclter2.Gasket
3.Lubricatenewltergasket.
4.Assureltermountingareaisclean.Screwlteron
untilgasketcontactsmountingplate.Thentighten
lterone–halfturn.
5.Startengineandletrunforabouttwominutesto
purgeairfromthesystem.Stoptheengineand
checkthehydraulicoillevelandforleaks.
CleaningHydraulicStrainer
ServiceInterval:Every800hours
1.Positionthevehicleonalevelsurface,stopengine,
engagetheparkingbrakeandremovekeyfrom
ignitionswitch.
2.Removedrainplug(Figure78)fromsideofreservoir
andlethydraulicuidowintodrainpan.
3.Noteorientationofhydraulichoseand90degree
ttingconnectedtostraineronsideofreservoir.
Removehydraulichoseand90degreetting.
4.Removestrainerandcleanbybackushingwitha
cleandegreaser.Allowtoairdrybeforereinstalling.
Figure78
1.Hydraulicstrainer
5.Reinstallstrainer.
6.Reinstallhydraulichoseand90degreettingto
strainerinsameorientation.
7.Reinstallandtightendrainplug.
8.Fillreservoirwithapproximately7.5qt.ofDexron
IIlATF .RefertoCheckingHydraulicFluid.
EmergencyBoxRaising
(withoutstartingengine)
Theboxcanberaisedinanemergencybycranking
starterorbyjumpinghydraulicsystem.
StarterMethod
•Crankstarterwhileholdingliftleverintheraise
position.Runstarterfor15secondsthenwait60
secondsbeforeengagingstarteragain.
•Ifenginewillnotcrank,theloadandbox
(attachment)mustberemovedtoserviceengineor
transaxle.
•Backanothervehicleuptotherearofthedisabled
vehicle.
JumpingHydraulicSystem
54