Toro 07360 - Page 55

Beforeservicingormakingadjustmentstothe
machine,stopengine,setparkingbrakeand
removekeyfromtheswitch.Anyloadmaterial
mustberemovedfrombedorotherattachment
beforeworkingunderraisedbed.Neverwork
underaraisedbedwithoutpositioningsafety
supportonafullyinstalledcylinderrod.
Note:Twohydraulichoses,eachwithamaleand
femalequickcoupler,thattthevehiclecouplersare
requiredtoperformthisoperation.
•Backanothervehicleuptotherearofthedisabled
vehicle.
Important:Thevehicleshydraulicsystemuses
DexronIIlATF .Toavoidsystemcontamination,
makesurevehicleusedtojumphydraulicsystem
usesanequivalentuid.
•Onbothvehicles,disconnectthetwoquickcoupler
hosesfromthehosessecuredtothecouplerbracket
(Figure79).
Figure79
1.Quickcouplerhoses
•Onthedisabledvehicle,connectthetwojumper
hosestothehosesthatweredisconnected
(Figure80).Capunusedttings.
Figure80
1.Disconnectedhoses2.Jumperhoses
•Ontheothervehicle,connectthetwohosestothe
couplerstillinthecouplerbracket(Connectthetop
hosetothetopcouplerandthebottomhosetothe
bottomcoupler(Figure81).Capunusedttings.
Figure81
1.Jumperhoses
•Keepallbystandersawayfromthevehicles.
•Startsecondvehicleandmoveliftlevertotheraise
positionwhichwillraisethedisabledbox.
•Movethehydraulicliftlevertotheneutralposition
andengagetheliftleverlock.
•Installthebedsafetysupportontotheextendedlift
cylinder.RefertoUsingtheBedSafetySupport.
Note:Withboththevehiclesturnedoff,move
theliftleverbackandforthtoremovethesystem
55