Toro 22327 - Cleaning; Removing Debris; Washing the Machine; Cleaning the Chassis

Cleaning
RemovingDebris
ServiceInterval:Beforeeachuseordaily
Important:Operatingtheenginewithblocked
screensand/orcoolingshroudsremovedwill
resultinenginedamagefromoverheating.
1.Parkthemachineonalevelsurfaceandlower
theloaderarms.
2.Shutofftheengine,removethekey,andallow
theenginetocool.
3.Openthehoodandsecuretheproprod.
4.Cleananydebrisfromthefrontandside
screens.
5.Wipeawaydebrisfromtheaircleaner.
6.Cleananydebrisbuildupontheengineandin
theoilcoolernswithabrushorblower.
Important:Operatingtheenginewith
blockedscreensand/orcoolingshrouds
removedwillresultinenginedamagedueto
overheating.
7.Cleandebrisfromthehoodopening,mufer,
heatshields,andradiatorscreen(ifapplicable).
8.Closethehood.
WashingtheMachine
Whenpressurewashingthemachine,dothefollowing:
•Wearappropriatepersonalprotectiveequipment
forthepressurewasher.
•Keepallguardsinplaceonthemachine.
•Avoidsprayingatelectroniccomponents.
•Avoidsprayingatedgesofdecals.
•Spraytheexteriorofthemachineonly.Donot
spraydirectlyintoopeningsinthemachine.
•Sprayonlythedirtypartsofthemachine.
•Usea40-degreeorlargerspraynozzle.40-degree
nozzlesareusuallywhite.
•Keepthetipofthepressurewasheratleast61cm
(2ft)awayfromthesurfacebeingwashed.
•Useonlypressurewasherswithpressurebelow
13790kpa(2000psi)andowbelow7.6L(2US
gallons)perminute.
•Replacedamagedorpeelingdecals.
•Greaseallgreasepointsafterwashing;referto
GreasingtheMachine(page29).
CleaningtheChassis
ServiceInterval:Every100hours—Checkfordirt
buildupinthechassis.
Overtime,thechassisundertheenginecollectsdirt
anddebristhatmustberemoved.Usingaashlight,
openthehoodandinspecttheareaundertheengine
regularly.Whenthedebrisis2.5to5cm(1to2
inches)deep,cleanthechassis.
1.Parkthemachineonalevelsurface,engagethe
parkingbrake,andlowertheloaderarms.
2.Raisethefrontofthemachinesothatthe
machineisangledbackward.
3.Shutofftheengineandremovethekey.
4.Removethe2boltssecuringthebottomplate
andremovethebottomplate(Figure75).
g031235
Figure75
1.Bottomplate
5.Removethefrontscreen;refertoRemovingthe
FrontScreen(page28).
6.Spraywaterintothechassistocleanoutthedirt
anddebris.
Note:Thewaterwilldrainatthebackofthe
machine.
Important:Donotspraywaterintothe
engine.
7.Greasethemachine;refertoGreasingthe
Machine(page29).
8.Installthebottomplate(Figure75).
9.Installthefrontscreen.
10.Lowerthemachine.
50
Go to Discount-Equipment.com to order your parts