Toro 30455TS - Table of Contents; Safety Instructions; Before Operating

3
TABLE OF CONTENTS
IDENTIFICATION AND ORDERING 2. . . . . . . . . . . . .
SAFETY INSTRUCTIONS 3. . . . . . . . . . . . . . . . . . . . . .
SAFETY AND INSTRUCTION DECALS 6. . . . . . . . . .
SPECIFICATIONS 8. . . . . . . . . . . . . . . . . . . . . . . . . . . .
LOOSE PARTS CHART 9. . . . . . . . . . . . . . . . . . . . . . . .
BEFORE OPERATING 9. . . . . . . . . . . . . . . . . . . . . . . . .
Check Engine Oil 9. . . . . . . . . . . . . . . . . . . . . . . . . .
Check Cooling System 9. . . . . . . . . . . . . . . . . . . . .
Fill Fuel Tank 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check Hydraulic Circuit Oil 10. . . . . . . . . . . . . . . . .
Check Front Axle Oil Level 11. . . . . . . . . . . . . . . . .
Check Rear Axle Lubricant 11. . . . . . . . . . . . . . . . .
Check Bidirectional Clutch Lubricant 11. . . . . . . .
Check Tire Pressure 12. . . . . . . . . . . . . . . . . . . . . . .
Check Torque of Wheel Nuts 12. . . . . . . . . . . . . . .
KNOW YOUR CONTROLS 13. . . . . . . . . . . . . . . . . . . .
OPERATING INSTRUCTIONS 15. . . . . . . . . . . . . . . . .
Starting and Stopping 15. . . . . . . . . . . . . . . . . . . . .
Priming / Bleeding Fuel System 15. . . . . . . . . . . . .
Checking Interlock System 15. . . . . . . . . . . . . . . . .
Operating Characteristics 16. . . . . . . . . . . . . . . . . .
Operating Tips 17. . . . . . . . . . . . . . . . . . . . . . . . . . .
SERVICE INTERVAL CHART 18. . . . . . . . . . . . . . . . . .
LUBRICATION 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Greasing 19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DAILY MAINTENANCE CHECKLIST 21. . . . . . . . . . .
MAINTENANCE SCHEDULE 22. . . . . . . . . . . . . . . . . .
AIR CLEANER MAINTENANCE 23. . . . . . . . . . . . . . .
General Air Cleaner Maintenance 23. . . . . . . . . . .
Servicing Air Cleaner 23. . . . . . . . . . . . . . . . . . . . . .
ENGINE MAINTENANCE 24. . . . . . . . . . . . . . . . . . . . .
Engine and Oil Filter 24. . . . . . . . . . . . . . . . . . . . . . .
Fuel System 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Cooling System 25. . . . . . . . . . . . . . . . . . . .
Engine Fan Belt 25. . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Timing Belt 25. . . . . . . . . . . . . . . . . . . . . . . .
HYDRAULIC MAINTENANCE 26. . . . . . . . . . . . . . . . .
Changing Hydraulic Oil 26. . . . . . . . . . . . . . . . . . . .
Replacing Hydraulic Filter 26. . . . . . . . . . . . . . . . . .
Checking Hydraulic Lines and Hoses 27. . . . . . . .
Hydraulic System Test Ports 27. . . . . . . . . . . . . . . .
Adjusting Traction Drive for Neutral 28. . . . . . . . . .
HYDRAULIC SCHEMATIC 29. . . . . . . . . . . . . . . . . . . .
AXLE MAINTENANCE 30. . . . . . . . . . . . . . . . . . . . . . . .
Changing Front Axle Lubricant 30. . . . . . . . . . . . . .
Changing Rear Axle Lubricant 30. . . . . . . . . . . . . .
Changing Bidirectional Clutch Lubricant 30. . . . .
Rear Wheel Toe-In 31. . . . . . . . . . . . . . . . . . . . . . .
BRAKE MAINTENANCE 31. . . . . . . . . . . . . . . . . . . . . .
Adjusting Service Brakes 31. . . . . . . . . . . . . . . . . .
P.T.O. MAINTENANCE 32. . . . . . . . . . . . . . . . . . . . . . . .
Adjusting P.T.O. Belt 32. . . . . . . . . . . . . . . . . . . . . . .
Adjusting Clutch 32. . . . . . . . . . . . . . . . . . . . . . . . . .
ELECTRICAL MAINTENANCE 33. . . . . . . . . . . . . . . .
Battery Care 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuses 33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ELECTRICAL SCHEMATIC 34. . . . . . . . . . . . . . . . . . .
PREPARATION FOR SEASONAL STORAGE 35. . . .
WARRANTY Back Cover. . . . . . . . . . . . . . . . . . . . . . . .
SAFETY INSTRUCTIONS
The GROUNDSMASTER 455D was tested and
certified by TORO for compliance with the
B71.41999 specifications of the American National
Standards Institute. Although hazard control and
accident prevention partially are dependent upon
the design and configuration of the machine, these
factors are also dependent upon the awareness,
concern, and proper training of the personnel
involved in the operation, transport, maintenance,
and storage of the machine. Improper use or
maintenance of the machine can result in injury or
death. To reduce the potential for injury or death,
comply with the following safety instructions.
BEFORE OPERATING
1. Read and understand the contents of this manual
before starting and operating the machine. Become
familiar with the controls and know how to stop the
machine and engine quickly.
A free replacement manual is available by sending the
complete model and serial number to:
The Toro Company
8111 Lyndale Avenue South
Minneapolis, Minnesota 55420.