Toro 37807 - Checking the Tire Pressure; Checking the Skids and Scraper; Checking the Operation of the Traction Drive

7
Checking the T ire Pressure
No Parts Required
Procedure
g252396
8
Checking the Skids and
Scraper
No Parts Required
Procedure
Refer to Checking and Adjusting the Skids and
Scraper ( page 20 ) .
9
Checking the Operation of
the T raction Drive
No Parts Required
Procedure
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust it
properly , if necessary .
1. Start the engine; refer to Starting the Engine
( page 14 ) .
2. Move the speed selector to Position R1; refer to
Operating the Speed Selector ( page 16 ) .
3. Squeeze the left (traction) lever to the handgrip
( Figure 10 ).
10