Standard Model
g254928
Figure 16
Shutting Off the Engine
g25241 1
Figure 17
Operating the T raction
Drive
CAUTION
If the traction drive is not properly adjusted,
the machine may move in the direction
opposite of what you intended, causing injury
and/or property damage.
Carefully check the traction drive and adjust
it properly , if necessary; refer to Checking
and Adjusting the T raction Cable ( page 20 ) for
more information.
Important: If the machine moves when the
traction lever is in the released position, check the
traction cable; refer to Checking and Adjusting
the T raction Cable ( page 20 ) or take the machine
to an Authorized Service Dealer for service.
1. T o engage the traction drive, squeeze the left
(traction) lever to the handgrip ( Figure 18 ).
g00101 1
Figure 18
2. T o stop the traction drive, release the traction
lever .
15
To Next Page
Loading...
