Toro 74267 - Leveling the Mower Side-to-Side; Adjusting the Front-to-Rear Mower Pitch

LevelingtheMowerSide-to-Side
1.Positiontherightbladeside-to-side(Figure92).
g006888
Figure92
1.Measureherefromblade
tohardsurface
2.MeasureatBandC
2.MeasuretherightbladeattheBlocation,from
alevelsurfacetothecuttingedgeoftheblade
tip(Figure92).
3.Recordthismeasurement.Thismeasurement
needstobe80to83mm(3-1/8to3-1/4inches).
4.Positiontheleftbladeside-to-side(Figure92).
5.MeasuretheleftbladeattheClocation(Figure
92),fromalevelsurfacetothecuttingedgeof
thebladetip.
6.Recordthismeasurement.Thismeasurement
needstobe80to83mm(3-1/8to3-1/4inches).
7.IfthemeasurementsatpositionsBorCarenot
correct,loosentheboltattachingtherearchain
totherear-supportarm(Figure93).
g001040
Figure93
1.Rearchain5.Adjustmentbolt
2.Rear-supportarm6.Frontswivel
3.Bolt7.Front-supportarm
4.Jamnut
8.Loosenthejamnutundertherear-support
armandadjusttheadjustmentbolttogeta
measurementof80to83mm(3-1/8to3-1/4
inches);refertoFigure93.
Note:Itisrecommendedthatbothsidesofthe
mowerareadjustedthesamedistance.
9.Tightenthejamnutundertherear-supportarm
andtightentheboltsecuringthechaintothe
rear-supportarm.
10.Adjusttheoppositesideifneeded.
AdjustingtheFront-to-RearMower
Pitch
1.Positiontherightbladefront-to-rear(Figure94).
68