Toro 74923TE - Adjusting the Motion Control Damper; Adjusting the Motion Control Neutral Lock Pivot

6.Runtheunitatleast5minuteswiththedriveleversat
fullforwardspeedtobringhydraulicoiluptooperating
temperature.
Note:Themotioncontrolleverneedstobeinneutral
whilemakinganynecessaryadjustments.
7.Bringthemotioncontrolleversintotheneutral
position.Adjustpumpcontrolrodlengthsbyrotating
thedoublenutsontherodintheappropriatedirection
untilthewheelsslightlycreepinreverse(Figure78).
Movethemotioncontrolleverstothereverseposition
andwhileapplyingslightpressuretotheleverallow
thereverseindicatorspringstobringtheleversback
toneutral.Thewheelsmuststopturningorslightly
creepinreverse.
g019757
Figure78
1.Doublenuts
8.Shutofftheunit.Removethejumperwirefromthe
wireharnessandplugtheconnectorintotheseat
switch.
9.Removethejackstands.
10.Raisethedeckandinstalltheheightofcutpin.
11.Checkthatthemachinedoesnotcreepinneutralwith
theparkbrakesdisengaged.
AdjustingtheMotionControl
Damper
Thetopdampermountingboltcanbeadjustedtoobtain
amoredesiredmotioncontrolleverresistance.See
Figure79formountingoptions.
Figure79
RHMotionControlShown
1.Torquethelocknutto22.6N-m(16.7ft-lb).Boltmust
protrudepastendoflocknutaftertorque.
2.Mostresistance(rmestfeel)
3.Damper
4.Mediumresistance(mediumfeel)
5.Leastresistance(softestfeel)
AdjustingtheMotionControl
NeutralLockPivot
Theangednutcanbeadjustedtoobtainamoredesired
motioncontrolleverresistancewhenmovingittotheneutral
lockposition.SeeFigure80foradjustmentoptions.
1.Loosenthejamnut.
2.Tightenorloosentheangednuttothedesiredfeel
asfollows:
•Formoreresistance,tightentheangednut.
•Forlessresistance,loosentheangednut
3.Tightenthejamnut.
Figure80
1.Flangednut2.Jamnut
51