Toro 79412 - 8 Installing the Bagger Top; Parts and Procedure Steps 1-2

g005666
Figure 13
1. Bagger top
3. Screen tab
2. Screen 4. Slot in bagger top
8
Installing the Bagger T op
Parts needed for this procedure:
1 Upper bagger tube
2
Bag frame
2 Bag assembly
8 Rivet
Procedure
1. Slide the brackets over the posts and rotate the
bagger top down to the operating position.
Note: The bagger top is easier to install if 2
people work together .
g492027
Figure 14
1. Bagger top 4. Key hole
2. Bagger frame
5. Post
3. Bracket, bagger top 6. Key
2. Install the 2 bag frames to the 2 bag assemblies.
1 1