Toro 79412 - Installing the Guards

g299192
Figure 4
Castor fork and wheel not shown for clarity .
1. Front right caster 4. Right mounting bracket
2. Forward hole (right side
shown)
5. Bolts (3/8 x 1 inch)
3. Locknut (3/8 inch)
g340355
Figure 5
1. Spacer 3. Suitcase weights
2. Locknut (3/8 inch) 4. Bolts (5/8 x 2-3/4 inches)
4
Installing the Guards
Machines Equipped with MyRide
Only
No Parts Required
Procedure
1. Insert the top of the guard under the deck; tilt the
guard so that it slides under the frame and t the
guard into the notches ( Figure 6 ).
g308505
g308526
Figure 6
1. Notch
2. Secure the guards to the frame using the bolts
removed in 2 Removing the Guards ( page 6 ) .
7