Toro Greenmaster Flex 1820 - Controls System Maintenance; Adjusting the Traction Control; Adjusting the Reel Control

ControlsSystem
Maintenance
AdjustingtheTraction
Control
Ifthetractioncontroldoesnotengageorifitslips
duringoperation,anadjustmentisnecessary.
1.MovethetractioncontroltotheENGAGED
position.
2.Measurethedistancefromthepinoneither
endofthetraction-controlspring(Figure48);if
itisnotwithin7.3to7.6cm(2-7/8to3inches),
adjusttheclutchaccordingtothestepsbelow.
g032417
Figure48
1.Measurethisdistance
(shouldbe7.3to7.6cm
(2-7/8to3inches).
4.Turnbuckle
2.Traction-controlspring5.Jamnut
3.Clevispin
A.Disengagethetraction-controllever.
B.Loosenthejamnutontheturnbuckleand
removetheclevispin,disconnectingthe
springfromtheturnbuckle(Figure48).
C.Turntheturnbuckleinorouttoadjustthe
lengthasnecessary.
D.Installtheturnbuckletothespringwiththe
clevispin.
E.MovethetractioncontroltotheENGAGED
position.
F.Measurethedistancefromthepinoneither
endofthetraction-controlspring(Figure
48);repeatstepsAthroughFuntilitis
within7.3to7.6cm(2-7/8to3inches).
AdjustingtheReelControl
Ifthereelcontroldoesnotproperlyengage,an
adjustmentisnecessary.
1.Ensurethatthereelcontrolisdisengaged.
2.Atthetransmissionbulkhead,adjustthe
reel-controlcable(Figure49)toattainaspring
lengthof70.6to72.4mm(2.78to2.85inches).
g017020
Figure49
1.Reel-controlcable2.Jamnuts
3.Atthecontrol-handlebulkhead,loosenthe
reel-controlcableuntilthereisslackinthecable
(Figure50).
36