Toro Greensmaster TriFlex 3420 - Page 32

InstallingtheElectrical
Counterweights
Securetheelectricalcounterweighttotheexisting
counterweightwith2capscrewsasshowninFigure
29.
g036342
Figure29
1.Capscrew(2)
3.Existingcounterweight
2.Electricalcounterweight
InstallingtheCuttingUnits
1.Disconnectthecuttingunitpowerdisconnect
couplers;refertoCuttingUnitPowerDisconnect
Connectors(page24).
CAUTION
Ifyoudonotdisconnectthepower
tothecuttingunits,someonecould
accidentallystartthecuttingunit,
causingseriousinjurytohandsandfeet.
Alwaysseparatethecuttingunitpower
disconnectcouplersbeforeworkingon
thecuttingunits.
2.Liftuponthefootrestandswingitopen,allowing
accesstothecentercuttingunitposition(Figure
30).
CAUTION
Thefootrestcanpinchngersifitfalls
intotheclosedposition.
Keepyourngersclearoftheareawhere
thefootrestseatswhileitisopen.
g014602
Figure30
1.Footrest—closed2.Footrest—open
3.Positionthecuttingunitunderthecenter
suspensionarm.
4.Withthelatchesonthesuspension-armbar
pointingup(i.e.,open)(Figure31),pushthe
suspensionarmdownsothatthebartsover
thebaracrossthetopofthecuttingunit(Figure
32).
g014609
Figure31
1.Latch—closedposition3.Latch—openposition
2.Suspension-armbar
g036343
Figure32
1.Suspension-armbar2.Cutting-unitbar
32