Groundsmaster 3500 Hydraulic SystemPage 5 − 9
40 GPM Hydraulic Tester (Pressure and Flow)
Use to test hydraulic circuits and components for flow
and pressure capacities as recommended in the Testing
section of this chapter. This tester includes the following:
1. LOAD VALVE: A simulated working load is created
in the circuit by turning the valve to restrict flow.
2. PRESSURE GAUGE: Glycerine filled 0 to 5000 PSI
gauge to provide operating circuit pressure.
3. FLOW METER: This meter measures actual fluid
flow in the operating circuit with a gauge rated from 4 to
40 GPM (20 to 150 LPM).
Toro Part Number: AT40002
NOTE: This tester does not include hoses (see Hydrau-
lic Hose Kit TOR6007 below).
Figure 10
Hydraulic Hose Kit
This kit includes fittings and hoses needed to connect 40
GPM hydraulic tester (AT40002) or high flow hydraulic
filter kit (TOR6011) to machine hydraulic traction system
components.
Toro Part Number: TOR6007
Figure 11
Hydraulic
System
To Next Page
Loading...
