Toro Multi Pro 5800 - Lubrication; Greasing the Sprayer; Greasing the Boom Hinges; Greasing the Actuator Rod Bearings

Lubrication
GreasingtheSprayer
ServiceInterval:Every50hours—Lubricatethepump.
Every50hours/Yearly(whichevercomesrst)
GreaseType:No.2general-purpose,lithium-basedgrease.
ToroPremiumAllPurposeGreaseisavailablefromyour
ToroDistributor.
1.Wipethegreasettingcleansothatforeignmatter
cannotbeforcedintothebearingorbushing.
2.Pumpgreaseintothebearingorbushing.
3.Wipeoffexcessgrease.
ThegreasettingspositionsareillustratedinFigure51
andFigure52.
1
g018935
Figure51
Pumpcenter
1.Greasepoint
Figure52
Threettingsinsideeachfrontwheel
1.Greasepoint
GreasingtheBoomHinges
ServiceInterval:Every100hours
Important:Iftheboomhingeiswashedwithwater,
allwateranddebrismustbeclearedfromthehinge
assemblyandfreshgreasemustbeapplied.
GreaseType:No.2general-purpose,lithium-basedgrease.
1.Wipethegreasettingscleansothatforeignmatter
cannotbeforcedintothebearingorbushing.
2.Pumpgreaseintothebearingorbushingateachtting
Figure53.
Figure53
Rightboom
1.Greasetting
3.Wipeoffexcessgrease.
4.Repeattheprocedureforeachboompivot.
GreasingtheActuatorRod
Bearings
ServiceInterval:Every400hours/Yearly(whichevercomes
rst)
GreaseType:No.2general-purpose,lithium-basedgrease.
1.Extendtheboomstothesprayposition.
2.Removethecotterpinfromthepivotpin(Figure54).
3.Liftupontheboomandremovethepin(Figure54).
Slowlylowertheboomtotheground.
4.Inspectthepinforanydamage,replaceifnecessary.
42