Toro Pro Force 44552 - Shutting off the Engine; Using the Remote Control; Adjusting the Blower Nozzle Direction

betweenattempts.Failuretofollowthese
instructionscanburnoutstartermotor.
5.Aftertheenginestarts,movethechokecontrolto
theOFFposition.Iftheenginestallsorhesitates,
movethechokebacktotheONpositionfora
fewseconds,thensettheenginespeedtothe
desiredsetting.Repeatthisasrequired.
ShuttingOfftheEngine
1.Decreasetheenginespeedto3/4throttle.
2.PresstheSTOPbuttonontheremotecontrol.
3.Ifleavingthemachine,rotatethekeytotheOFF
positionandremoveitfromtheengine(Figure
12).
UsingtheRemoteControl
Theremotecontrolactivates(powersup)when
youpressanybutton.Toconservebatterypower,
theremotecontrolstaysactiveforapproximately3
secondsbeforeautomaticallyshuttingdownunless
thereisbuttonactivitywithinthe3secondlimit.When
theunittimesoutandpowersdown,allremotecontrol
LEDactivitystops(Figure14).Pressinganybutton
activatestheremotecontrol.
g029818
Figure14
1.LEDlight5.Rotateright
2.Rotateleft
6.Increaseenginespeed
3.Decreaseenginespeed7.Enginestop
4.Enginestart
TheRF2CANandTEC2403controllersrevertto
PowerSaveMode(untilapowercycleoccurs)ifthe
baseunitisinactiveformorethan2.5hourswithout
communicationfromtheremotecontrol.PowerSave
Modeisalowcurrentstateofthebaseunit.InPower
SaveMode,thebaseunitdoesnotcommunicate
withtheremotecontrol,activateoutputs,orfunction
asnormal.
•Wheninthetime-outmodetheenginedoesnot
run(orquitsrunning)andtheremotecontroldoes
notcontrolanyfunction.
•Towakethecontrollerintime-outmode,turnthe
keyswitchtotheOFFpositionandthenturnthe
keyswitchtotheRUNposition.
•Toavoidcontrollertime-outduringoperation,use
theremotecontroltorotatetheblowernozzleor
changetheenginespeedatleastevery2.5hours.
16