Toro ProCore 864 - Jacking the Machine; Greasing the Bearings and Bushings

JackingtheMachine
CAUTION
Ifthemachineisnotproperlysupportedby
blocksorjackstands,themachinemaymove
orfall,whichmayresultinpersonalinjury.
•Ensurethatthemachineisparkedona
solid,levelsurfacesuchasaconcrete
oor.Alwayschockthetractionunittires.
•Priortoraisingthemachine,removeany
attachmentsthatmayinterferewiththe
safeandproperraisingofthemachine.
•Whenchangingattachmentsorperforming
otherservice,usecorrectblocks,hoists
orjacks.
•Usejackstandsorsolidwoodblocksto
supporttheraisedmachine.
Note:Ifavailable,useahoisttolifttherearofthe
machine.Usetheeyeletsinthecoringheadbearing
housingsashoistattachmentpoints(Figure26)
g007308
Figure26
1.Liftingeyelets
GreasingtheBearingsand
Bushings
ServiceInterval:Every50hours
Themainworkingbearingsofthemachinearesealed
forlifeandrequirenomaintenanceorlubrication.
Thisdrasticallyreducesthemaintenancerequired
andeliminatestheriskofgreaseoroilbeingdropped
ontotheturf.
Therearegreasettingsthatmustbelubricatedwith
anSAEmulti-purpose,high-temperaturegreasewith
high-pressure(EP)performanceorSAEmulti-purpose
lithium-basedgrease.
Thelubricationpointsare:
PTOdriveshaft(3)(Figure27)
g007309
Figure27
Rollerbearings(ProCore864:2;ProCore1298:4)
(Figure28)
g007310
Figure28
Driveshaftbearings(ProCore864:1;ProCore1298:
2)(Figure29)
g007311
Figure29
29