Checking the Hydraulic-Fluid Level (continued)
IMPORTANT
Do not overfill the tank.
G417019
Full mark (dipstick)
Add mark (dipstick)
5. If the level is low, add the appropriate amount of the specified fluid to raise the level to
the full mark.
6. Install the dipstick onto the filler neck.
Inspecting the Hydraulic Lines and Hoses
Inspect the hydraulic lines and hoses for leaks, kinked lines, loose mounting supports, wear,
loose fittings, weather deterioration, and chemical deterioration.
Note: Make all necessary repairs before operating.
Maintenance: Hydraulic System Maintenance Page 6–33 3464-490 A
To Next Page
Loading...
