Overview of the Indicator Lights
G461477
Indicator light
• Flashing red—active fault
• Solid red—active advisory
• Solid blue—calibration/dialog messages
• Solid green—normal operation
Operating Tips
Becoming Familiar with the Machine
• Before mowing grass, practice operating the machine in an open area.
• Start and shut off the engine.
• Operate in forward and reverse.
• Lower and raise the cutting units and engage and disengage the cutting units.
• When you become more familiar with the machine, practice operating up and down
slopes at different speeds.
Overview of the Warning System
If a warning light comes on during operation, stop the machine immediately and correct the
problem before continuing operation. Serious damage could occur if you operate the
machine with a malfunction.
Overview of Mowing Patterns
This is the most effective method to prevent washboarding.
Change mowing patterns often to minimize a poor after-cut appearance from repeatedly
mowing in the same direction.
Operation: During Operation Page 5–22 3464-490 A
To Next Page
Loading...
