Toro Revolution Series - Adjusting the Anti-Scalp Rollers; Positioning the Flow Baffle

AdjustingtheAnti-Scalp
Rollers
Wheneveryouchangetheheight-of-cut,adjustthe
heightoftheanti-scalprollers.
1.Parkthemachineonalevelsurface,disengage
thePTO,andmovethemotion-controllevers
outwardtothePARKposition.
2.Shutoffthemachine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Adjusttheanti-scalprollersasshown.
g398002
Figure36
Leftanti-scalproller
1.Flangenut4.Bushing
2.Spacer
5.Bolt
3.Anti-scalproller
g398003
Figure37
Middleanti-scalproller
1.Flangenut3.Bushing
2.Anti-scalproller4.Bolt
g398004
Figure38
Rightanti-scalproller
1.Flangenut4.Bushing
2.Spacer
5.Bolt
3.Anti-scalproller
PositioningtheFlowBafe
Thefollowingguresarerecommendationsonly.
Adjustmentsvarybygrasstype,moisturecontent,
andtheheightofthegrass.
Removetheknobandcarriagebolt,adjustthebafe
totheappropriateposition,andinstalltheknoband
carriagebolt.
Note:Somemachineswillusetheouterorinner
holes,dependingonthesizeofthemowerdeck.
Note:Ifthepowerdrawsdownandthemower
groundspeedisthesame,openthebafe.
g401984
Figure39
1.Knobandcarriagebolt
2.Bafeunderdeck
PositionA
Thisisthefully-rearposition.Thesuggestedusefor
thispositionisasfollows:
•Short,lightgrassmowingconditions
•Dryconditions
28