Toro Revolution Series - Pre-Maintenance Procedures; Removing the Rear Cover; Lubrication; Lubricating the Mower Deck-Lift Pivots

Pre-Maintenance
Procedures
RemovingtheRearCover
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch,andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutoffthemachine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Turnthebattery-disconnectswitchtotheOFF
position.
4.Removethe8screwssecuringtherearcover.
5.Removethecover.
g401469
Figure55
Lubrication
LubricatingtheMower
Deck-LiftPivots
ServiceInterval:Every100hours
Uselightoilorspraylubricanttolubricatethedeck-lift
pivots.
g336930
Figure56
38