Toro Revolution Series - Changing the Transmission Fluid; Adjusting the Maximum Speed Range

ChangingtheTransmission
Fluid
ServiceInterval:Aftertherst50hours
Every500hours
Fluidtype:ToroSyntheticElectricMotorDriveOil
Capacity:150mL(5oz)
1.Parkthemachineonalevelsurface,disengage
thePTO,andmovethemotion-controllevers
outwardtothePARKposition.
2.Shutoffthemachine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removethetire.
g409011
Figure61
4.Placeadrainpanunderthetransmission.
5.Removethetopplugandbottomplug.Allow
theuidtodrain.
g380054
Figure62
6.Installthebottomplugandtorqueitto7to8
N∙m(62to70in-lb).
7.Removeasideplug.
8.Adduid,asspeciedatthebeginningofthis
procedure,throughthetopholeuntilthelevel
reachesthesideplugopening.
g380053
Figure63
9.Installthetopplugandsideplug.T orquethem
to7to8N∙m(62to70in-lb).
10.Installthetireandtorquethelugnutsto75to
88N∙m(55to65ft-lb).
11.Repeatfortheothertransmission.
AdjustingtheMaximum
SpeedRange
Note:TheInfoCenterdisplaysonly2itemsatatime;
however,thefollowingguresshowthefullmenus
forcontext.
1.Parkthemachineonalevelsurface,disengage
thePTO,andmovethemotion-controllevers
outwardtothePARKposition.
2.Enableaccesstoprotectedmenus;referto
AccessingProtectedMenus(page17).
3.IntheMAINMENU,scrolldowntoSERVICEand
pressthe
button.
g376300
Figure64
42