Toro Revolution Series - Controls System Maintenance; Adjusting Control Handle Position

4.IntheSERVICEmenu,scrolldowntoMAXSPEED
RANGEandpressthebutton.
g425331
Figure65
5.Adjustthemaximumspeedrangeasdesired.
g425330
Figure66
Note:Thenumberindicatesthemaximum
speedsetting(2through7)thattheoperatorcan
selectonthemaininformationscreenasshown.
g425332
Figure67
6.Pressthebuttontosavethenewvalue.
ControlsSystem
Maintenance
Adjustingthe
Control-HandlePosition
AdjustingtheHeight
Youcanadjustthemotioncontrollevershigheror
lowerformaximumcomfort.
1.Parkthemachineonalevelsurface,disengage
theblade-controlswitch(PTO),andmovethe
motion-controlleversoutwardtothePARK
position.
2.Shutoffthemachine,removethekey,andwait
forallmovingpartstostopbeforeleavingthe
operatingposition.
3.Removethehardwareholdingthemotion-control
levertothecontrol-armshaft.
g400371
Figure68
1.Bolt(2)2.Control-armshaft
4.Movethecontrollevertothenextsetofholes.
Securetheleverwiththehardware.
5.Repeattheadjustmentfortheoppositecontrol
lever.
43