Toro TC 1000 - Carburetor Specifications

Carburetor Specifications
SPECIFICATIONS
Item
Throttle Valve Needle Jet
High Speed Mixture Screw
Idle Speed Adjusting Screw
Inlet Needle Arm Height
(from body surface)
Valve Spring
Valve Opening Pressure
Valve Closing Pressure
Standard
Clip positioned in middle groove
3 turns out 1/2 turn
Adjust
so idle is 2300 to 2700 rpm
1.4 to 1.6 mm (0.055 to 0.063")
__-
Fastener Torques