To Next PageTo Next Page
Need help?Do you have a question about the Toro TC 1000 and is the answer not in the manual?
General| Power Source | Gas |
|---|---|
| Cutting Width | 41 cm |
| Line Diameter | 0.095 in (2.4 mm) |
| Weight | 5.6 kg |
| Cutting System | Bump Feed Head |
| Engine Type | 2-stroke |
General safety precautions for operating the trimmer.
Procedure for ensuring proper operation before storage of more than a month.
Details on engine type, bore, displacement, compression ratio, output, etc.
Specifications for spark plug gap, ignition coil air gap, crankshaft runout, etc.
Specifications for throttle valve, mixture screws, idle speed, and valve pressures.
Lists possible causes and remedies for no spark or backfiring issues.
Lists causes and remedies for engine flooding, not getting fuel, or lacking power.
Lists causes and remedies for low compression or general lack of power.
Introduction to the diaphragm-style carburetor and its systems.
Explains how the diaphragm pump system functions to deliver fuel.
Details how the carburetor meters and mixes fuel and air for combustion.
Explains the function and recommended procedure for using the primer system.
Procedures for adjusting idle speed, mixture, and throttle valve.
Covers primer pump operation, disassembly, inspection, and reassembly.
Overview of components working together for spark generation.
Describes flywheel magnets and ignition coil role in generating electricity.
Explains how the trigger module amplifies voltage and controls timing.
Explains how to adjust the ignition coil air gap for proper spark and timing.
